新利体育luck18

标准光?

标准协议光?

兼容协议光?

其它种类光器件

技术支持

X2光?

X2光?

X2光?槭10G光?橹兄饕囊焕喾庾澳?,由XENPAK生长而来。是一种支持热插拔的输入/输出装置,主要用于以太网X2端口的交换机或路由器与网络连结端口。

X2光?槔飞ぃ

X2是从Xenpak标准演进而来的,其内部功效?橛隭enpak以及在电路板上的应用都基内幕同,在实现10G以太网光接口的功效方面都是只使用一个?榧纯。由于Xenpak光?樽爸玫降缏钒迳鲜毙枰诘缏钒迳喜僮鞅冉吓哟蟮乜,且无法实现高密度应用。而经过革新的X2光?椋ㄆ涮寤挥蠿enpak的一半左右)可以直接放到电路板上,因此适用于高密度的机架系统和PCI网卡应用。

X2光?樘氐慵坝τ茫

X2也使用Xenpak电气接口,但有少数地方例外。X2 提供一个4位端口地点的空间,比Xenpak少一位。 X2 还减少了电源引脚的数目,并使底板和电气接地公用。X2保存了Xenpak的4个厂商专用的引脚。在光技术方面,X2支持10GbE(以太网)、 OC192同步光纤网、10GFC(光纤通道)和其他标准。

X2光?

X2 to SFP+ Converter

X2 to SFP+ Converter

The F-tone X2 to SFP+ Converter Module offers investment protection for 10 Gigabit Ethernet X2 ports of X2 switches by enabling migration from X2 to Small Form-Factor Pluggable Plus (SFP+) form factor without having to upgrade or replace the switches. This Module converts a 10 Gigabit Ethernet X2 port into a 10 Gigabit Ethernet SFP+ port.

X2 Transceiver

X2 Transceiver

F-tone X2 is a standardized form factor for 10 Gb/s fiber optic transponders that is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s. It is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions are available. X2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation XENPAK transponders. Its electrical interface to the host board is also standardized and is called XAUI (4 x 3.125 Gb/s).

<<  1 [2

Search

网站地图网站地图
友情链接:bti体育  银娱  BG大游  918博天堂  尊龙凯时  千赢国际  尊龙凯时  pp电子  bifa必发  威斯尼斯wns888入口  asiagame  pg电子